Description

E-Glass Fiber Chopped Strand Mat(Powder type)

Glass Fiber Powder Binder Chopped Strand Mat is an unwoven fabrics consisting of randomly distributed chopped strands held together with powder binder.

Powder Chopped Strand Mats are compatible with unsaturated polyester, vinyl ester, phenolic and epoxy resins.

The products are widely used in hand lay-up process and can also be used in compression molding and continuous laminating process and fixed table laminating process. The typical end-use applications include various panels, boats, bathroom accessories, automotive parts and cooling towers.

Characteristics of Chopped strand mat

1.Uniform density ensures consisttent fiberglass content and mechanical properties of the composites products;

2.Uniform powder distribution ensures good mat integrity, little loose fibers and small roll diameter;

3.Excellent flexibility ensures good moldability with no spring back at sharp angles;

4.Fast and consistent wet-out speed in resins and rapid air lease reduce resin consumption and production cost, and enhances productivity and mechanical properties of the end products.

5, The composite products have high dry and wet tensile strength and good transparency.

6, Optional for high strength with stiff mat for panel laminating and midle strength with soft mat for hand layup.

Package:

Each Powder Chopped Strand Mat is wound onto a paper tube which has an inside diameter of 90mm. The roll outside diameter is approximately 265mm. Each roll is wrapped up in plastic film and then packed in a cardboard box. The rolls are stacked horizontally or vertically onto pallets. All pallets are stretch wrapped and strapped to maintain stability during transport.

Storage:

Unless otherwise specified, powder chopped strand mats should be stored in a cool, dry, water-proof area. It is recommended that the room temperature and humidity be always maintained at 15℃ to 35℃ and 35% to 65% respectively.

Technical DATE SHEET

E-Glass Fiber Chopped Strand mat(Powder)